CloudCompare forum

Thank you for your continued support with the platform. To test the differences between meshes created by two different software programs, I compared the mesh-to-mesh distances between two identical meshes (same file) and two very similar meshes (from two different files). Unexpectedly, I found a di...

Thank you once again, Mr. Daniel, for your response and continued support. I have one more question if you don't mind. The scanner I am evaluating attempts to autofill areas when it cannot capture the bottom of the actual hole, resulting in noticeable discrepancies at the bottom of the model, with t...

Hello again, Mr. Daniel. I've emailed you (daniel.girardeau@gmail.com ) with the reference and control meshes attached. My main concern revolves around scanning teeth with holes of varying geometries (differing depths and widths) to assess the digital scanner's accuracy against reality (Micro-comput...

Hello Mr. Daniel, I sincerely appreciate your ongoing support on this platform. Currently, I'm immersed in my research project where I aim to compare two meshes, both exhibiting a cylindrical shape. During my exploration, while examining the C2M signed distances for one sample, I noticed that the po...

Hello, Mr. Daniel, I trust you're doing well. I've established two perpendicular planes aligned with the C2M distances. Now, I aim to select multiple points on the plane created to enhance the precision of vertical distance measurements because my cloud has a cylinder shape. I attempted to select va...

Thank you, Mr. Daniel,

I had to remove some points that were distant from the model, but after doing so, it worked.

Thank you very much.

Dear Mr. Daniel, I want to express my gratitude for your ongoing support on this platform. I am currently engaged in my research, where I have segmented two files for superimposition. However, upon selecting these segmented files for the C2M process, I have encountered a recurring issue, the source ...

yes
(refer the attachments)

You can review the calculation methods used in Geomagic by following this link.
https://support.3dsystems.com/s/article ... uage=en_US

First and foremost, I would like to express my gratitude for the substantial investment in developing and maintaining the exceptional software you provide, as well as the continuous support offered through your platform. I am currently engaged in research for my thesis, focusing on Geomagic Control ...