Extract polyline from point cloud

[NytSkab2000]

Hi,
I have this section slice of a point cloud:

pointcloud_sectionslice.jpg (43.54 KiB) Viewed 25638 times

Is there a way to auto generate polyline(s) tracing the center of the point cloud formations (maybe based on point density or 2d surface geometry)? I know how to extract the concave hull contour from the Section Cut menu, but I will only get the outer contour.

Thank you.

[daniel]

Sorry, I'm not sure to understand what you are trying to extract here... Can you maybe outline/draw it on the image?

[NytSkab2000]

I have this scan segment of a niche:

niche_segment.jpg (79.73 KiB) Viewed 25531 times

I will cut out a slice of this niche and manually trace the center of the point cloud with a polyline:

niche_slice.jpg (111.04 KiB) Viewed 25531 times

The resulting polyline looks like this:

polyline.jpg (77.72 KiB) Viewed 25531 times

I would like to know if it is some how possible to automate this process (of tracing the center of the point cloud slice with a polyline) with cloudcompare?

[daniel]

And you don't manage to do that with the Cross Section tool? (https://www.cloudcompare.org/doc/wiki/i ... le_contour)